Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

User Cannot Select a Reveal

9 ANTWORTEN 9
GELÖST
Antworten
Nachricht 1 von 10
jorgedelacova7458
4262 Aufrufe, 9 Antworten

User Cannot Select a Reveal

We are having a curious issue where one of our users cannot select (to edit) a wall reveal she has just placed. The file is workshared, and I have no problem selecting and/or editing the reveal. She can select pinned elements, so that does not appear to be the problem. Another symptom of the odd file behavior is that she does not get a preview of the reveal before she places it. Has anyone our there encountered this before?

Tags (3)
9 ANTWORTEN 9
Nachricht 2 von 10
ToanDN
als Antwort auf: jorgedelacova7458

Did she restart?
Nachricht 3 von 10
jorgedelacova7458
als Antwort auf: ToanDN

The user did restart. That did not resolve the issue. Any other ideas?

Nachricht 4 von 10
martijn_pater
als Antwort auf: jorgedelacova7458

It's not in the selection settings (Select>, under modify)?

Nachricht 5 von 10
jorgedelacova7458
als Antwort auf: martijn_pater

No, we checked that one, too.
Nachricht 6 von 10
martijn_pater
als Antwort auf: jorgedelacova7458

Maybe it's a user-specific model category view setting? Does this occur in every view?

Nachricht 7 von 10
jorgedelacova7458
als Antwort auf: martijn_pater

User resolved it. It turned out to be a Workset issue.
Nachricht 8 von 10
martijn_pater
als Antwort auf: jorgedelacova7458

... because if it does, check your worksets... :zwinkerndes_Gesicht:

 

(almost :leicht_lächelndes_Gesicht: )

Nachricht 9 von 10
jorgedelacova7458
als Antwort auf: ToanDN

The user self-resolved the problem. It turns out the problem was with the active workset. Once she changed that, the reveal returned to full functionality.
Nachricht 10 von 10

We have sometimes same problem.

I suggest you to check the model each week if all the elements are properly assigned to specific Workset/Discipline. It will help.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report