Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Use parameter to rotate the masking region

1 ANTWORT 1
Antworten
Nachricht 1 von 2
qixing.chenNYA88
151 Aufrufe, 1 Antwort

Use parameter to rotate the masking region

Hello, 

I want to Use parameter to rotate the masking region heighted in blue.  Could you provide some suggestions on hoe to apply angle dimensions to rotate the masking region. Thanks 

qixingchenNYA88_0-1655867051179.png

 

1 ANTWORT 1
Nachricht 2 von 2
barthbradley
als Antwort auf: qixing.chenNYA88

Host the MR to a Ref. Line Work Plane.  Align and Lock one end of the RL to the x/y  intersection of the 2 Ref. Planes. Pull an Angled Dimension between the RL and the x RP and label it with a Parameter. Enter the Angle value in the Parameter Field.  

 

Rot MR1.pngRot MR2.png

 

...order of operation is to place and lock the  Ref. Line into place  first, pull the labeled dimension, and then draw the Masking Region on top of the Ref. Line Work Plane. Align and lock the MR to the RL.  

 

ROT MR3.png

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report