Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Unjoin two generic models?

3 ANTWORTEN 3
GELÖST
Antworten
Nachricht 1 von 4
jen-sa
521 Aufrufe, 3 Antworten

Unjoin two generic models?

Hi. I'm modeling parapet wall flashings using a generic model family. They seem to join autimatically the way i don't want them to, preventing me from extending them further:

2021-12-27_15-32-26.png

This is what i'm trying to achieve:

2021-12-27_15-34-06.png

I can only do this when they are situated at slightly different heights, which seems like an "incorrect" way to solve this problem.

3 ANTWORTEN 3
Nachricht 2 von 4
barthbradley
als Antwort auf: jen-sa

Disable Automatic Join.  

 

Dissallow Join.png

 

 

edit...actually, I don't understand the issue - or the screenshots.  Can you post the file?  

Nachricht 3 von 4
barthbradley
als Antwort auf: jen-sa

Okay, maybe you are referring to the insertion point of the family.  If so, put Origin Ref Planes where you what them in the Family. The intersection of the x,y,z Origin Ref. Planes is the insertion point of the Family in the Project.  

Nachricht 4 von 4
jen-sa
als Antwort auf: barthbradley

That worked, thank you!

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report