Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Unit Rounding

1 ANTWORT 1
GELÖST
Antworten
Nachricht 1 von 2
millerew17
604 Aufrufe, 1 Antwort

Unit Rounding

Questions: 

 

1. What are most residential/light commercial drafters using for their unit rounding setting? My OTB template is set at 1/32". 

 

2. Will changing it to 1/16" affect my Annos which I like printed at 3/32" ? 

 

Thanks!

 

 

1 ANTWORT 1
Nachricht 2 von 2
ToanDN
als Antwort auf: millerew17


@drahthaar wrote:

Questions: 

 

1. What are most residential/light commercial drafters using for their unit rounding setting? My OTB template is set at 1/32". 

 

2. Will changing it to 1/16" affect my Annos which I like printed at 3/32" ? No

 

Thanks!

 

 


 

If you are talking about Project Units then the Rounding only affect the specific Units such as Length, Area, Volume, etc...  For example, changing Length rounding from 1/32" to 1/16" will only affect Length reports such as linear dimensions, tags, or schedules.  It does not physically change the Length of elements.  Annotation sizes are not govern by Project Units rounding.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report