Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Trimming walls at corner

4 ANTWORTEN 4
Antworten
Nachricht 1 von 5
Anonymous
610 Aufrufe, 4 Antworten

Trimming walls at corner

take a look at the attached image file. Why are identical walls trimming to the centerline of the walls rather than a clean trim to the edges?

4 ANTWORTEN 4
Nachricht 2 von 5
BIM.Consultant
als Antwort auf: Anonymous

Select a wall, a blue dot will appear at the end of it. Right click on it and click "Allow Join". Do the same for the other wall. (Note: if you see the option "Disallow join" it means allow join is already active; so do nothing and go check the other wall)
Nachricht 3 von 5
ToanDN
als Antwort auf: Anonymous

Sometime it happens when there is another wall at the corner got demolished, among other reasons. Just click on the wall, click on the blue dot at the end, and drag it to the edge. That would fix it.
Nachricht 4 von 5
Anonymous
als Antwort auf: BIM.Consultant

I checked before posting and both walls were joined. That's what's frustrating.

Sincerely,

David M. Rosen, Architect
Nachricht 5 von 5
Anonymous
als Antwort auf: ToanDN

That's what I do but it gets tedious after a while.

Sincerely,

David M. Rosen, Architect

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report