Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Top or Bottom for Face Based Family

3 ANTWORTEN 3
GELÖST
Antworten
Nachricht 1 von 4
curtisridenour
307 Aufrufe, 3 Antworten

Top or Bottom for Face Based Family

I opened a face based family today and the light fixture was hosted to the bottom of the default extrusion. I have never built any families this way before and I was wondering if there are any advantages I am not aware of.

 

It seems to behave just like all my other face based families do. But I could be missing something. Any insight would be much appreciated.

 

curtisridenour_0-1707838011640.png

 

 

 

Beschriftungen (2)
3 ANTWORTEN 3
Nachricht 2 von 4
ToanDN
als Antwort auf: curtisridenour

If the solid host is reversed so that the origin ref plane is at the bottom of it the it makes no difference other then the perception when editing the family.

Nachricht 3 von 4
barthbradley
als Antwort auf: curtisridenour

I can see where it might be a PITA.  If it makes you feel better, change the direction of host extrusion (positive to negative or vice versa) and the family geometry (e.g. the direction of offset of the Ref. Plane from the host face).  

Nachricht 4 von 4
curtisridenour
als Antwort auf: ToanDN

this was my assumption as well. but i figured i would ask those that know more than me before i dismissed it.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report