Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

to interact with linked model

9 ANTWORTEN 9
Antworten
Nachricht 1 von 10
TomasoCardia
462 Aufrufe, 9 Antworten

to interact with linked model

Hi all, 

I'm tryng to buildthe architectural parts of the project on the structural linked model. 

How to make it interact between linked walls (for example) with Architectural model? 

I tried the "copy-monitoring" but, when a copy a wall, revit transform it on a wall of my model (I doesn't copy the structural wall). 

Thank you allCaptura.JPG

9 ANTWORTEN 9
Nachricht 2 von 10
ToanDN
als Antwort auf: TomasoCardia

"Interact" how? If you mean joining/ cutting the linked walls then No.
Nachricht 3 von 10
TomasoCardia
als Antwort auf: ToanDN

No, I mean that the architectural wall can see the structural wall and interact with them. 

In the image you can see that the pink line (ceramic layer) doesn't turn in the right way

Nachricht 4 von 10
ToanDN
als Antwort auf: TomasoCardia

Still No.  Walls in the host model are not intelligent enough to "see" Walls in the linked models.  That's where users come into play - Make Dumb Things Smart Again.

Nachricht 5 von 10
TomasoCardia
als Antwort auf: ToanDN

which could be a solution?

Nachricht 6 von 10
ToanDN
als Antwort auf: TomasoCardia

What am I seeing? Are the pink thin walls or a layer of a composite wall?
Nachricht 7 von 10
TomasoCardia
als Antwort auf: ToanDN

layers

Nachricht 8 von 10
ToanDN
als Antwort auf: ToanDN

Can you show a sketch of how do you want it to be? Getting rid of that pink piece at the wall end? And have you thought about how to install the 2 layers of gyp. bd. between the structural wall and your frame?
Nachricht 9 von 10
TomasoCardia
als Antwort auf: ToanDN

Captura.JPGthe ceramic must be puted on the wall

Nachricht 10 von 10
ToanDN
als Antwort auf: TomasoCardia

Remove Wrap at Opening for the Wall Type and use the Rectangle Opening tool to cut that end of the wall.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report