Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Storefront System Recessed In Wall

3 ANTWORTEN 3
Antworten
Nachricht 1 von 4
Anonymous
639 Aufrufe, 3 Antworten

Storefront System Recessed In Wall

I'm trying to figure out how to create a storefront system that is recessed inside of a concrete wall. I don't think I can create a storefront wall as it will create an opening in the wall. Below is a section view of the storefront system I'm trying to create.

 

Any insight would be greatly appreciated.

 

 

Recessed Storefront Section.JPG

3 ANTWORTEN 3
Nachricht 2 von 4
ToanDN
als Antwort auf: Anonymous

Don't embed the storefront in the wall.  Use a void family to cut the wall recess where occurs.

Or, model 2 thinner walls, one without opening, the other with edited profile to fit in the curtain system, then join them.

Nachricht 3 von 4
barthbradley
als Antwort auf: Anonymous

.

Nachricht 4 von 4
joe_keogh
als Antwort auf: Anonymous

Hi @Anonymous 

This is how I would do it

StoreFront.PNG

Joe Keogh
Director | Design Technology + Innovation
www.viewlistic.com.au

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report