Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Stair

21 ANTWORTEN 21
GELÖST
Antworten
Nachricht 1 von 22
n.q.hung
1636 Aufrufe, 21 Antworten

Stair

Hello Everybody, 

I want to creat a stair like this image but stair run shape is a bit uncomfortable :enttäuschtes_Gesicht:

How can i create this, please help me !

Thanks alot !

Stair.png

Tags (1)
Beschriftungen (1)
21 ANTWORTEN 21
Nachricht 2 von 22
n.q.hung
als Antwort auf: n.q.hung

Can i cut the shape of stair run ?

@ToanDN 

Nachricht 3 von 22
cuanstephens
als Antwort auf: n.q.hung

Hey @n.q.hung 

You'll have draw the stair in "creat sketch" mode. Make sure the levels are correctly set in your setting before commencing.

Nachricht 4 von 22
n.q.hung
als Antwort auf: cuanstephens

thanks but i want to edit landing to like this image

do you have any ideas to do this ?

Nachricht 5 von 22
n.q.hung
als Antwort auf: cuanstephens

Thanks but i want to edit landing to like this image

do you have any ideas to do this ?

Nachricht 6 von 22
_Vijay
als Antwort auf: n.q.hung

For curved shape connection between flight and landing, you can not make... maybe you can try within pace family. but it's not an exact solution. 

Nachricht 7 von 22
n.q.hung
als Antwort auf: _Vijay

Really..., family generic model can resolve it ? 

But it's quite a hassle to create a new family of stairs, right?

Nachricht 8 von 22
barthbradley
als Antwort auf: n.q.hung

Is this what you are after?  

 

Curved Stringer.jpg

 

 

Nachricht 9 von 22
lim.wendy
als Antwort auf: n.q.hung

Hi @n.q.hung,

 


Thank you for submitting your question in our discussion forums.
Have you had a chance to look over the suggestions provided by our experts? I wanted to reach out and see if you were able to get your issue figured. 
Let us know how things are going!



Wendy Lim

Data Nerd | Community Advocate | AEC Industry


facebook twitter twitter blogs pm


Join the new online Rail Community


Rails Summit




Nachricht 10 von 22
Mohamed-Nassar
als Antwort auf: n.q.hung

Hello may this help you

https://www.youtube.com/watch?v=aEu0lwHmPPQ

https://www.youtube.com/watch?v=0y3tQoaFAJU 

----------------------------------------------------------------------------------
If the above reply answers your question; Please mark it with ACCEPT SOLUTION
----------------------------------------------------------------------------------

Mohamed Nassar , ACP, Autodesk Ambassador Gold
BIM Support / Structure Modeler
Nachricht 11 von 22
n.q.hung
als Antwort auf: barthbradley

Wow, how did you do it, it looks good...

Nachricht 12 von 22
n.q.hung
als Antwort auf: lim.wendy

My problem still not fix, can you help me ?

Nachricht 13 von 22
n.q.hung
als Antwort auf: barthbradley

@barthbradley  please show me how to create it, thanks !

Nachricht 14 von 22
barthbradley
als Antwort auf: n.q.hung


@n.q.hung wrote:

@barthbradley  please show me how to create it, thanks !


 

Model the Stair Stringer as an In-Place Component using a simple extrusion.  Easy, breezy.  

 

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2016/EN... 

 

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2018/EN...

 

...oh, and set your "Supports" under your Stair Type Properties to "None".  

Nachricht 15 von 22
lim.wendy
als Antwort auf: barthbradley

As always, thank you @barthbradley! Super helpful!

 



Wendy Lim

Data Nerd | Community Advocate | AEC Industry


facebook twitter twitter blogs pm


Join the new online Rail Community


Rails Summit




Nachricht 16 von 22
n.q.hung
als Antwort auf: barthbradley

@barthbradley Stringer by model in place, right ?

but it cannot intersect the stair flight on the inside...

Do you have any other treatment ?

i want to use this stair to volume estimate so i need relative accuracy ...

Many Thanks !

Stair 3.png

Nachricht 17 von 22
barthbradley
als Antwort auf: n.q.hung

Post your file.  

Nachricht 18 von 22
n.q.hung
als Antwort auf: barthbradley

@barthbradley 

I attached my file below, please help me see it bro

Nachricht 19 von 22
barthbradley
als Antwort auf: n.q.hung

I don't understand what you are after? Why don't you just change the structural depth? It's a monolithic cast-in-place concrete stair; right?   

Nachricht 20 von 22
barthbradley
als Antwort auf: n.q.hung

Blue-Solid.jpg

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report