Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

snapping 3D modelling to linework

1 ANTWORT 1
Antworten
Nachricht 1 von 2
hughecchapman
116 Aufrufe, 1 Antwort

snapping 3D modelling to linework

I want to accurately move some 3D modelling to linework in a linked .dwg file.

 

The way I want to do this is to snap the move command to point 1 and move the 3D geometry to point 2 -

 

hughecchapman_0-1718881642062.png

As far as I can see I have snapping turned on:

hughecchapman_1-1718881706609.png

I can snap to the linked dwg linework but not the 3D geometry.

 

Can anyone help me work out why?

 

TIA

 

 

 

1 ANTWORT 1
Nachricht 2 von 2
barthbradley
als Antwort auf: hughecchapman

Not sure I understand. Revit is noun/verb selection. So if you want to move "A" to "B", you would need to select the entire Element that "A" is attached to, then press "Move", then select "A" and then select "B".  TAB-Selection may be required. 

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report