Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Sloped roof has missing part

4 ANTWORTEN 4
GELÖST
Antworten
Nachricht 1 von 5
Anonymous
324 Aufrufe, 4 Antworten

Sloped roof has missing part

 

Hi,

 

I created to my Project a roof By footprint and sloped it using slope arrow and everytime the result is this:

 

Sieppaa.PNG

 

The roof has always that missing part in the lower side. Could somebody know why this happened? 

4 ANTWORTEN 4
Nachricht 2 von 5
ToanDN
als Antwort auf: Anonymous

Change fascia cut to Plumb cut or increase the fascia depth. Before you ask, yes I an talking about the properties of the roof, not the fascia as a separate element.
Nachricht 3 von 5
barthbradley
als Antwort auf: ToanDN

@ToanDN: Do you really think that is what is happening in this view? There's something more going on here. 

Nachricht 4 von 5
ToanDN
als Antwort auf: Anonymous

Does it look like a two cut plumb? I can't verify it right now since the only thing resembles a computer here is the slot machine, and there are lots of them.

Nachricht 5 von 5
barthbradley
als Antwort auf: ToanDN

k

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report