Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Slanted Wall Top/Bottom

4 ANTWORTEN 4
Antworten
Nachricht 1 von 5
jfjacques
406 Aufrufe, 4 Antworten

Slanted Wall Top/Bottom

How can I square the bottom of the slanted wall off so that is aligns with the 2x6?  These always flat? Is there really no perpendicular option like stair stringers? 

 

jfjacques_0-1619120670018.png

 

Beschriftungen (1)
  • op
4 ANTWORTEN 4
Nachricht 2 von 5
cbcarch
als Antwort auf: jfjacques

Try using Attach--attach to Roof. ( not sure how your model is built.) From Revit Help:

When attaching the top or base of a slanted wall to a roof, ceiling, or floor, the target element must cover the slanted wall entirely as viewed from above.

Cliff B. Collins
Registered Architect The Lamar Johnson Collaborative Architects-St. Louis, MO
Nachricht 3 von 5
jfjacques
als Antwort auf: cbcarch

There is no roof in this case. 

Nachricht 4 von 5
barthbradley
als Antwort auf: jfjacques

Join Geometry

Nachricht 5 von 5
cbcarch
als Antwort auf: jfjacques

As a quick test, try making the angle element (slanted wall?) on the right side a Roof. Then attach the slanted wall on the left to it.

Or perhaps the opposite.

Cliff B. Collins
Registered Architect The Lamar Johnson Collaborative Architects-St. Louis, MO

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report