Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Shared Coordinates - Best Practices

5 ANTWORTEN 5
Antworten
Nachricht 1 von 6
jorgedelacova7458
431 Aufrufe, 5 Antworten

Shared Coordinates - Best Practices

What are best practices when working with Shared Coordinates?

5 ANTWORTEN 5
Nachricht 2 von 6
DavidDillonJr
als Antwort auf: jorgedelacova7458

@jorgedelacova7458 Here is a great resource from Autodesk.

David Dillon
Nachricht 3 von 6
barthbradley
als Antwort auf: jorgedelacova7458

Can you narrow the scope a bit?  Shared Coordinates is a  book - not a post.  We might have time to express an opinion or share our experience  with a single or few aspects of Sharing Coordinates. 

Nachricht 4 von 6
hmunsell
als Antwort auf: jorgedelacova7458

are you trying to coordinate with a Civil site DWG file? use the Shared Reference Point tool...

https://knowledge.autodesk.com/support/revit-products/troubleshooting/caas/sfdcarticles/sfdcarticles...

Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.



EESignature


Nachricht 5 von 6
jorgedelacova7458
als Antwort auf: barthbradley

I should have been more specific. Right now, we have a site model and a building model. We create the site model and link the civil CAD file (center-to-center, I think?), and then acquire its coordinates and model the topography from the civil dwg.  Then, we link the building model to the site model, orient and locate it correctly, and publish coordinates. After closing the site model, we open the building model and link the site model using shared coordinates. Sounds easy, but we keep getting misaligned models.

Additionally, we send building models to consultants and tell them to acquire shared coordinates from the building model. For some reason we tend to get misaligned model from them, even though we tell them to reorient and relocate and acquire coordinates from our building model any time we move the building model.

 

Nachricht 6 von 6
barthbradley
als Antwort auf: jorgedelacova7458

I would recommend publishing to Named Sites, not the default "Internal". That being said, your workflow is valid. I'm not sure what's going.  Can you post the CAD file?  

 

 

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report