Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Section Line not Cutting Imported/Linked AutoCAD 3D model

4 ANTWORTEN 4
GELÖST
Antworten
Nachricht 1 von 5
wr.marshall
1070 Aufrufe, 4 Antworten

Section Line not Cutting Imported/Linked AutoCAD 3D model

I am trying to view a section on an imported/linked AutoCAD 3D, but it is showing the end only (front portion behind the section line). What steps need to be taken in order to view this AutoCAD 3D as if it were a Revit element?

4 ANTWORTEN 4
Nachricht 2 von 5
syman2000
als Antwort auf: wr.marshall

You have to insert the 3d CAD into Revit family like Generic Model or Site. Then it will cut properly.

Check out my Revit youtube channel - https://www.youtube.com/user/scourdx
Nachricht 3 von 5
wr.marshall
als Antwort auf: syman2000

No options for that when inserting into a project. Would I need to first place in a Generic Family and then put into the project?

Nachricht 4 von 5
ToanDN
als Antwort auf: wr.marshall

Create an in place mass or in place generic model and link the CAD there.
Nachricht 5 von 5
wr.marshall
als Antwort auf: ToanDN

@ToanDN  @syman2000 Thank you, in place generic model resolved the problem. It is now creating normal sections.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report