Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Schedule count does not total the correct nunmber.

7 REPLIES 7
SOLVED
Reply
Message 1 of 8
vincent.dohertyFZ7C5
916 Views, 7 Replies

Schedule count does not total the correct nunmber.

vincent.dohertyFZ7C5
Contributor
Contributor

We use a parking stall that can hold 2 bikes. So in the schedule I want it to count this family twice. I added some new project parameters (number based) so in the properties I can apply a value of two to this family and a value of one to the other single bike storage stalls.

vincentdohertyFZ7C5_1-1643219742404.pngvincentdohertyFZ7C5_2-1643219777592.png

 

The schedule displays the correct quantity, however the schedule count total is wrong and only counts the family as 1. 

vincentdohertyFZ7C5_0-1643219711855.png

 

 

 

Have I created the wrong project parameter ? Or is there a way to create a calculated parameter that will multiply this this stall by 2 and will total correctly in the count total ? 

 

Thanks

0 Likes

Schedule count does not total the correct nunmber.

We use a parking stall that can hold 2 bikes. So in the schedule I want it to count this family twice. I added some new project parameters (number based) so in the properties I can apply a value of two to this family and a value of one to the other single bike storage stalls.

vincentdohertyFZ7C5_1-1643219742404.pngvincentdohertyFZ7C5_2-1643219777592.png

 

The schedule displays the correct quantity, however the schedule count total is wrong and only counts the family as 1. 

vincentdohertyFZ7C5_0-1643219711855.png

 

 

 

Have I created the wrong project parameter ? Or is there a way to create a calculated parameter that will multiply this this stall by 2 and will total correctly in the count total ? 

 

Thanks

Labels (1)
7 REPLIES 7
Message 2 of 8

RDAOU
Mentor
Mentor

@vincent.dohertyFZ7C5 

 

  1. Sort by Family
  2. Format the new integer parameter to calculate totals
  3. Use the integer parameter instead of the Count parameter

 

 

 

YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION


0 Likes

@vincent.dohertyFZ7C5 

 

  1. Sort by Family
  2. Format the new integer parameter to calculate totals
  3. Use the integer parameter instead of the Count parameter

 

 

 

YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION


Message 3 of 8

vincent.dohertyFZ7C5
Contributor
Contributor

What new integer parameter do I need to create ?

0 Likes

What new integer parameter do I need to create ?

Message 4 of 8

ToanDN
Consultant
Consultant

Don't use the built-in Count.  Use the back to Back parameter and format it to Calculate Totals.

0 Likes

Don't use the built-in Count.  Use the back to Back parameter and format it to Calculate Totals.

Message 5 of 8

jvpantin2
Collaborator
Collaborator
Accepted solution

Hi, maybe a trick like this will works:

https://www.youtube.com/watch?v=RKq0kBCe-ts

¿Tu problema fue solucionado? Selecciona 'Marcar como solución'.
Así ayudas a otras personas a encontrar respuestas y agradeces a los miembro de la comunidad.

Hi, maybe a trick like this will works:

https://www.youtube.com/watch?v=RKq0kBCe-ts

¿Tu problema fue solucionado? Selecciona 'Marcar como solución'.
Así ayudas a otras personas a encontrar respuestas y agradeces a los miembro de la comunidad.
Message 6 of 8

RDAOU
Mentor
Mentor
Accepted solution
The one u added where u input 1 single or 2 for double stalls


YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION


The one u added where u input 1 single or 2 for double stalls


YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION


Message 7 of 8

vincent.dohertyFZ7C5
Contributor
Contributor

This is really interesting, thanks for sharing.

0 Likes

This is really interesting, thanks for sharing.

Message 8 of 8

vincent.dohertyFZ7C5
Contributor
Contributor

Ahh I understand, thank you.

Ahh I understand, thank you.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report