Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Same demolished roof appears normal from above

5 REPLIES 5
SOLVED
Reply
Message 1 of 6
cscott12ZX5LX
315 Views, 5 Replies

Same demolished roof appears normal from above

See below. Both views have same phasing settings but the left side roof isn't appearing as demolished in the roof plan higher up. Why is this happening?

 

cscott12ZX5LX_0-1715696917397.png

 

5 REPLIES 5
Message 2 of 6

Make sure your Phase Filter is showing overriden demolished elements, also check filters and VG.

 

 

 

Message 3 of 6

I solved this problem by using plan region over the roof and cutting at the 2nd floor level like the view to the right

Message 4 of 6
ToanDN
in reply to: cscott12ZX5LX

Extend the view range bottom to cover both roofs.

Message 5 of 6
cscott12ZX5LX
in reply to: ToanDN

It was

Message 6 of 6
cscott12ZX5LX
in reply to: ToanDN

So changing view depth didn't fix it but changing bottom range did

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report