Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Rotate a grouped bulding in Revit

1 ANTWORT 1
Antworten
Nachricht 1 von 2
maria_trialversion20
149 Aufrufe, 1 Antwort

Rotate a grouped bulding in Revit

Hello there, I am trying to rotate an entire grouped building so I can copy it and paste it onto a separate site model. However, after grouping and selecting rotate I get the following message:

 

'Can't change plane of the Floor Sketch' and the command will not rotate anything. 

Any idea how I can correct this?

 

I would really appreciate your help. 

 

Kind regards

1 ANTWORT 1
Nachricht 2 von 2

 better to Link the Project into another Project, rotate there and then Bind Link...and Ungroup if you really want.  

 

....just to be clear: if you are merely trying to place your building into another Project having the Site, then Link only (don't Bind), rotate Link into position, and the save the Building's position/orientation on the Site by Publishing the Site Coordinates to the Building Project. 

 

About Shared Coordinates | Revit 2019 | Autodesk Knowledge Network

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report