Roombook/BuildingBook_ results

[mairh_tsek]

Hello all,

I just start to learn about Roombook..extension.

I calculate the surfaces of materials using the Roombook extension and after using the Building book.

In the images below I have the same wall. The area of resine that I have in Roombook excel is different from the area resine that I have in Buildingbook excel.

Is someone that can help me to understand why?

Thank you in advance!

[Anonymous]

The headers are left out so its not that obvious to tell, but if memory serves, you have somewhere the lenght and height iof your wall and as i can see in one you have 40 / 10 and in the second you have 40 / 8

So there are, for me, two options:

- You modified the wall (maybe unknowingly) inbetween the two exports.

- Roombook and building book dont read the parameters in the same way. In that case you will have to analyze your design and look for possible explanations. One idea i can think of is that one take the height of your room and the second one takes the real height of the wall. Obviously it could be something else.

[barthbradley]

https://knowledge.autodesk.com/support/revit-lt/troubleshooting/caas/sfdcarticles/sfdcarticles/Calcu...