Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

ROOM vs. AREA

3 ANTWORTEN 3
Antworten
Nachricht 1 von 4
dm0144
960 Aufrufe, 3 Antworten

ROOM vs. AREA

Hello everyone

 

 

I would really appreciate your help here.

 

What is the difference between ROOM element and AREA element in Revit? Which one is used in practice to extract area data to spread sheet?

 

Also, here I have particular difficulty using the AREA tool in a group

Why, when I try to place area, I get notification that the area is not properly defined but, at the same time, some of the tools in the Room and Area tab, mainly the Area Boundary, are grayed out?

3 ANTWORTEN 3
Nachricht 2 von 4
amarkonathala
als Antwort auf: dm0144

 

Hi @dm0144 ,

If u want to Create an Area Plan To show Only Spacial Occupancy for the Projects Areas are used,

amarkonathala_0-1617795772447.png

 

 

Nachricht 3 von 4
amarkonathala
als Antwort auf: dm0144

To create an Area First you have to create  an Area plan by selecting that

amarkonathala_0-1617796356966.png

Choose an Appropiate Level to create Area plan

amarkonathala_1-1617796435246.png

Now you can Draw Area Boundaries and Provide Areas 

amarkonathala_2-1617796515983.png

 

 

 

Nachricht 4 von 4
syman2000
als Antwort auf: dm0144

Depends what you want to achieve. If you want customized area where your boundary extend to exterior of the wall and have interior in the middle of the wall, then you have to use area. Sadly area will not show up in section. As well area only can be added if you create area plan and not floor plan.

 

I don't recommend you group area and area boundaries. The area boundaries will always remove itself from the group whenever you modify the line.

Check out my Revit youtube channel - https://www.youtube.com/user/scourdx

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report