Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Room and Room tag

8 ANTWORTEN 8
Antworten
Nachricht 1 von 9
Anonymous
410 Aufrufe, 8 Antworten

Room and Room tag

I have attached my revit file. I could not able to get room and room tag in plan view without providing extra room separator.. Kindly Let you know & reach me.

(Note: Group also need to be same)

8 ANTWORTEN 8
Nachricht 2 von 9
barthbradley
als Antwort auf: Anonymous

I cannot figure out what the heck is going in this Project!  It's driving me crazy!  I cannot replicate or repair.  I can rebuild it and it tags fine though.  

 

Following with bated breath...

Nachricht 3 von 9
Anonymous
als Antwort auf: barthbradley

It's okay....No issues.. Thank you so much for your reply.

Nachricht 4 von 9
barthbradley
als Antwort auf: Anonymous

Did you fix it, or just throw in the towel and recreate from scratch?  

Nachricht 5 von 9
ennujozlagam
als Antwort auf: Anonymous

are trying to achieved something like this? just change your computation height to 1000. thanks

ROOM.JPG

 





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 6 von 9
ennujozlagam
als Antwort auf: Anonymous

other way is to increase the height of the wall. please see attached. thanks

wallx.jpg





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 7 von 9
barthbradley
als Antwort auf: ennujozlagam

@ennujozlagam: The only way I got it to function properly, was by swapping out all the walls for a different type from the Preview Selector.  Still, it would be nice to have a bone fide explanation. I've never seen this before. 

Nachricht 8 von 9
Anonymous
als Antwort auf: barthbradley

 Not yet.. I deleted that wall and made new walls.  Then I got 

Thank you for your reply.......

Nachricht 9 von 9
Anonymous
als Antwort auf: ennujozlagam

I can not able to change the wall inside my project..

I created new walls inside my project then i got room and tag.

Thanks you so much .....

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report