Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Roofs and walls

2 ANTWORTEN 2
Antworten
Nachricht 1 von 3
jfjacques
181 Aufrufe, 2 Antworten

Roofs and walls

Do people connect the walls and roofs so that the wall extends to meet the top face of the roof? 

I then get a line on top of the roof, depicting where the finish extends. Best practice?

2 ANTWORTEN 2
Nachricht 2 von 3
barthbradley
als Antwort auf: jfjacques


@jfjacques wrote:

Do people connect the walls and roofs so that the wall extends to meet the top face of the roof? 


No.  We attach walls to underside of roof.  

Nachricht 3 von 3
ToanDN
als Antwort auf: jfjacques


@jfjacques wrote:

Do people connect the walls and roofs so that the wall extends to meet the top face of the roof? 

I then get a line on top of the roof, depicting where the finish extends. Best practice?


It comes down to your design intent.  Attach the top of the walls to the underside of the roofs is obviously easier but if you need the exterior finish of the walls cover the edges of the roofs it can be done too, just more steps.

 

Capture.PNG

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report