Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Roof by extrusion ABOVE the extrusion line and not under

1 ANTWORT 1
GELÖST
Antworten
Nachricht 1 von 2
asadabbasi7RLF7
266 Aufrufe, 1 Antwort

Roof by extrusion ABOVE the extrusion line and not under

-Is there any kind of invert or flip command where the roof is created above the extrusion line and not under?

- I can use the roof offset, but then we'll have to change the offset everytime we change the roof thickness.

Beschriftungen (2)
1 ANTWORT 1
Nachricht 2 von 2
ToanDN
als Antwort auf: asadabbasi7RLF7

Roof by extrusion and roof by foot print are always above the base.  You could create a roof by face then it can be below the base surface.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report