Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Revit Stair Stringer start at offset

2 ANTWORTEN 2
Antworten
Nachricht 1 von 3
Ajay_J_S
166 Aufrufe, 2 Antworten

Revit Stair Stringer start at offset

Hi I have a stair to be modelled as shown in the picture below.FB_IMG_1728443744152.jpg

Does anyone know how to make the stringer to start from a offset as shown in the picture below?

edited.jpg

I have modelled the entire stair but unable to provide offset for stringer staring at lower end.

Ajay_J_S_0-1728454869168.png

Please note I don't want to use model in place or any other wall tool.

Appreciate anyone's help &Thanks in advance.

Beschriftungen (3)
2 ANTWORTEN 2
Nachricht 2 von 3
ToanDN
als Antwort auf: Ajay_J_S

Sure thing.  Open the attached 2024 model and inspect.

 

ToanDN_0-1728458932420.png

 

Nachricht 3 von 3
Ajay_J_S
als Antwort auf: ToanDN

@ToanDN Hi. You asked me to inspect the model right!! Here is the result: - You have made a mass family & inserted it to the project & hid the element it to make the cut by projecting the stringer to horizontal cut.

This is not the way I wanted. I want a solution or a way from stair tool itself. If I would make the cut by either void family or mass family, I would not has raised this question. I want a solution from within the stair tool itself. 

Ajay_J_S_1-1728466474844.png

@all @autodesk 

 

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report