Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Revit: Site modelling - curbs not cuttable or joinable with floor

1 ANTWORT 1
Antworten
Nachricht 1 von 2
samuelP5VEP
160 Aufrufe, 1 Antwort

Revit: Site modelling - curbs not cuttable or joinable with floor

Hi, 

 

I am working on creating a site model and am stuck with cutting the curbs out of the floor. (as illustrated in the pictures). The difficulty is that pretty much every part of the floor is sloped and has curved borders here and their which sometimes complicates the modelling of the curbs. 

The curbs were mostly modelled with model in place sweeps and sometimes floors as well using the modify sub elements tool. 

Tried using the same method with a void sweep but works only sometimes and in only a few places. 

 

Am looking for a solution to this - could also be with dynamo! 

Thanks

Screenshot 2024-05-21 110140.png

Screenshot 2024-05-21 110944.png

1 ANTWORT 1
Nachricht 2 von 2
samuelP5VEP
als Antwort auf: samuelP5VEP

So found an older post containing a workaround. By using roofs + fascia instead and floors +sweeps/edge, ot cuts perfectly ! 

Just stuck now with remodelling the road from floor to roof, ahah

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report