Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Revit radial wall

2 ANTWORTEN 2
GELÖST
Antworten
Nachricht 1 von 3
Anonymous
523 Aufrufe, 2 Antworten

Revit radial wall

Hello everyone, I am very new to Revit and just started to learn revit, I don't know how to draw a radial wall like this picture 1. I can only draw like this in picture 2

kelvinchan10266_0-1622443984636.png

Picture 1

kelvinchan10266_1-1622444042197.png

Picture 2

2 ANTWORTEN 2
Nachricht 2 von 3
ennujozlagam
als Antwort auf: Anonymous

https://www.youtube.com/watch?v=5SFM6AdUKCw





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 3 von 3
RDAOU
als Antwort auf: Anonymous

@Anonymous 

 

  1. Start Wall tool
  2. From Draw Tools - Use Line (By default)
  3. Place start point
  4. Place mouse cursor in the direction/angle you want to draw wall
  5. Type 25 and hit enter
  6. From Draw Tool - Use Start-End-Radius
  7. Place mouse cursor in the direction/angle you want to place the wall
  8. Type 25 and hit Enter (this will set the end of the circular wall)
  9. Type 25/2 (this specifies the radius)
  10. From Draw Tools - Use Line 
  11. Place mouse cursor in the direction/angle you want to place the wall
  12. Type 25 and hit Enter
  13. Hit Escape to end or continue placing Wall elements

wall.gif

YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION


Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report