Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Revit entourages and cars

15 ANTWORTEN 15
GELÖST
Antworten
Nachricht 1 von 16
mzmaso90
1153 Aufrufe, 15 Antworten

Revit entourages and cars

Hello guys!Do you know an toolpack or a website to upload modern free 3D models for entourages and cars?

15 ANTWORTEN 15
Nachricht 2 von 16
ennujozlagam
als Antwort auf: mzmaso90

RevitCity.com | Object |





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 3 von 16
Alfredo_Medina
als Antwort auf: mzmaso90

Another good resource for cars and entourage for Revit is Enscape. Not free, though.


Alfredo Medina _________________________________________________________________ ______
Licensed Architect (Florida) | Freelance Instructor | Profile on Linkedin
Nachricht 4 von 16
syman2000
als Antwort auf: mzmaso90
Nachricht 5 von 16
mzmaso90
als Antwort auf: mzmaso90

Thank you to all of you, I very liked the Revit city!

Nachricht 6 von 16
RSomppi
als Antwort auf: mzmaso90


@mzmaso90 wrote:

Thank you to all of you, I very liked the Revit city!


Be careful with the content there. Some of it is quite amatuerish. 

Nachricht 7 von 16
mzmaso90
als Antwort auf: mzmaso90

I found poor contents in 3d entourage people instead, any more complete website on that?

Nachricht 8 von 16
RSomppi
als Antwort auf: mzmaso90

See message #3.

Nachricht 9 von 16
syman2000
als Antwort auf: mzmaso90


@mzmaso90 wrote:

I found poor contents in 3d entourage people instead, any more complete website on that?


https://www.bimobject.com/en/demo/entourage-figures?location=ca

Check out my Revit youtube channel - https://www.youtube.com/user/scourdx
Nachricht 10 von 16
mzmaso90
als Antwort auf: Alfredo_Medina

Hi @Alfredo_Medina , I found also escape very useful. but I don't catch yet how to renderize the obects inserted from escape librarey asset. I tried to start the render but all its obects remain like draft grey solids. Do you know how to get over that?

mzmaso90_0-1699211550442.png

 

Nachricht 11 von 16
syman2000
als Antwort auf: mzmaso90

Enscape asset only appear with Enscape rendering. Regular Revit realistic will not show up Enscape render

Check out my Revit youtube channel - https://www.youtube.com/user/scourdx
Nachricht 12 von 16
mzmaso90
als Antwort auf: syman2000

Exactly, I need to deal with this due to the fact, even is inside as tools,a fter downloading and activated the trial shift, is not opening itself the engine render. Is finishing at 5% and then it stop itself. They told me to renew the last AMD Firepro graphic card but the last updating driver is 2021 from same namedriver. Anyone is an expert of updating graphic drivers?

mzmaso90_0-1699221716030.png

 

Nachricht 13 von 16
Alfredo_Medina
als Antwort auf: mzmaso90

Seems that Enscape cannot load in your computer. Most likely you need more space in your C drive. Please check that. The model does not seem large, though. Maybe your computer does not have the required specifications (graphics card, maybe).

 

By the way, it is Enscape, not "Escape".


Alfredo Medina _________________________________________________________________ ______
Licensed Architect (Florida) | Freelance Instructor | Profile on Linkedin
Nachricht 14 von 16
mzmaso90
als Antwort auf: Alfredo_Medina

Yes, I think so, For example my last updated graphic card has a release in 2021. It's an AMD Fire Pro W4190M and no updated seems available. But I still have 109 GB of free space in C:. Sincerely I don't know , I now wrote on AMD community if anyone knows about how to update this, otherwise I am a little bit out of hope.

Nachricht 15 von 16
Alfredo_Medina
als Antwort auf: mzmaso90

Check Enscape's website. Most likely they have information about minimum requirements. If your graphics card does not meet the minimum specs required, well, you just have to order a new one and have it installed. 


Alfredo Medina _________________________________________________________________ ______
Licensed Architect (Florida) | Freelance Instructor | Profile on Linkedin
Nachricht 16 von 16
ToanDN
als Antwort auf: mzmaso90

You can always get SketchUp models from 3Dwarehouse and import them in Revit families.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report