Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Revetment designs - fixed top level and adjusting to contour bottom

8 ANTWORTEN 8
Antworten
Nachricht 1 von 9
JPanopio
667 Aufrufe, 8 Antworten

Revetment designs - fixed top level and adjusting to contour bottom

Is there anyone who experienced revetment design or near the sea structure. We just want to develop drawings which focuses on sea protection structures. 

8 ANTWORTEN 8
Nachricht 2 von 9
barthbradley
als Antwort auf: JPanopio

Are you asking if you can do it in Revit.  Sure. Why not?  Do you have a picture of what you want to build?  Post it.  We'll let you know how to model it in Revit.

Nachricht 3 von 9
joe_keogh
als Antwort auf: JPanopio

Hi @JPanopio 

 

I'm sure there woud not be too many issues with modelling a Revetment in Revit, however, Civil 3D of Infraworks are probably better suited for this purpose.

Joe Keogh
Director | Design Technology + Innovation
www.viewlistic.com.au

Nachricht 4 von 9
JPanopio
als Antwort auf: JPanopio

JPanopio_0-1608010753001.png

This is my plan and I want to have an initial design for this one, hope you can teach me some so I can probably work it out?

Nachricht 5 von 9
barthbradley
als Antwort auf: JPanopio

What the hell are you planning? 

Nachricht 6 von 9
JPanopio
als Antwort auf: barthbradley


Sorry for that man, I want to make a revetment design for a marina with a fixed top layer and a bottom layer adjusting to the contour.

Nachricht 7 von 9
barthbradley
als Antwort auf: JPanopio

Dude, pretend your boss just gave you this picture and told you to design the revetment. What would you say? 

 

revetment.jpg

 

 

Nachricht 8 von 9
JPanopio
als Antwort auf: barthbradley

Hahaha, yeah, this is somewhat gruesome. I just want to try making it in 3D model in revit.

Nachricht 9 von 9
barthbradley
als Antwort auf: JPanopio

...yeah, totally.  

 

[emoji face that hasn't been invented yet] 

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report