Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

RCP Ceiling Height to bottom of core

1 ANTWORT 1
GELÖST
Antworten
Nachricht 1 von 2
ben.studiomod
790 Aufrufe, 1 Antwort

RCP Ceiling Height to bottom of core

So I'm trying to show my ceiling height on my RCP, and I want it to show the height to the bottom of the core, but everything I've tried so far only shows me the height to the face of finish.

 

I have a 9'-0" top plate, so this puts the bottom of my ceiling joists at 9'-0" AFF.  This is the measurement I want to show as my ceiling height because this is the measurement the contractor and framers care about.  Instead, both the ceiling tag and the spot elevation tag show 8'-11 3/8" AFF because it is measuring to the bottom of the 5/8" gyp. bd. finish. 

 

Is this something that is just built into Revit or do I have to do a tricky and time consuming workaround for this?  How can I go about showing the ceiling height I want?

 

thanks

1 ANTWORT 1
Nachricht 2 von 2
barthbradley
als Antwort auf: ben.studiomod

What about turning the Ceiling into Parts?  You could report the core face then.  

 

Ceiling Ht 1.pngCeiling Ht 2.pngCeiling Ht 3.png

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report