Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Rail stair - pick new host

3 ANTWORTEN 3
Antworten
Nachricht 1 von 4
Anonymous
1746 Aufrufe, 3 Antworten

Rail stair - pick new host

Hi Community! I draw a stair , i made mistake to delete the rail so i after deleted i redraw a rail then rail new host.jpg Pick new host but my rail do not go along the stair like attached image. How can i do? Thank you very much!

3 ANTWORTEN 3
Nachricht 2 von 4
ennujozlagam
als Antwort auf: Anonymous

hi, you can try to pick host in 3d mode and try to break the railing into 2 parts( one railing one pick host). thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 3 von 4
Anonymous
als Antwort auf: Anonymous

@Anonymous

 

I know it's 6-months too late, but JIC.

 

I learned this the hard way myself.

 

From Railing help page:

"If you are adding a railing to a run of stairs, the railing must be sketched along the inside line of the stair stinger in order for the railing to host and slope correctly.

Likewise, if you are adding a railing to the top surface of a floor, slab, slab edge, wall, or roof, sketch the line within the boundary of the host element."
Nachricht 4 von 4
AAAStructural
als Antwort auf: Anonymous

THANK YOU!

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report