Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Problems with distance and bearings

4 ANTWORTEN 4
Antworten
Nachricht 1 von 5
vanderloo5
305 Aufrufe, 4 Antworten

Problems with distance and bearings

I'm not sure what I'm missing here but when I enter the distances and bearings from this parcel map with surveyor's units, my last line is coming up about 7 1/2 feet short of closing the loop. Can someone help me figure out what is wrong with this table. Working on Lot 7.

Thank You

Beschriftungen (3)
4 ANTWORTEN 4
Nachricht 2 von 5
Lachlan-JWP
als Antwort auf: vanderloo5

Is the arc dimension an arc length or chord length? That could be a factor?

Nachricht 3 von 5
ToanDN
als Antwort auf: vanderloo5

Get rid of 5 and Add Line to Close instead.

 

ToanDN_0-1715830154961.png

 

Nachricht 4 von 5
vanderloo5
als Antwort auf: ToanDN

@ToanDN That's what I did at first but the dimension on that line was 133' which is not accurate.

Nachricht 5 von 5
vanderloo5
als Antwort auf: Lachlan-JWP

I thought about that on the arc length but kind of concluded that changing it to the arc dimension, (arc length), would not make up 4'. It is currently cord length. I believe that makes the arc length 41' and change.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report