Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Problemas con IFC's

2 ANTWORTEN 2
Antworten
Nachricht 1 von 3
MiguelYanezSuarez
243 Aufrufe, 2 Antworten

Problemas con IFC's

Tengo un problema con el geoposicionamiento de un archivo IFC, si lo vinculo en el proyecto se sitúa correctamente en coordenadas, pero necesito que no sea un vínculo para poder usarlo en Bim360

 

Al abrir IFC desde Revit me realiza la conversión del formato a rvt pero ya no se posiciona en coordenadas

 

Agradecería la ayuda 

2 ANTWORTEN 2
Nachricht 2 von 3
Rafal.Gaweda
als Antwort auf: MiguelYanezSuarez

Hi @MiguelYanezSuarez 

 

To upload the models and display them correctly, use one of the solutions below.

Open the files in Navisworks:

  1. Open IFC files in Navisworks with Legacy interface enabled
  1. Save the files as NWD.
  2. Upload the NWD files to BIM 360.

Open the files in Revit:

  1. Open a new model in Revit.
  2. Link the IFC files.
  3. Revit will automatically create IFC.RVT files in the same folder where IFC files are located.
  4. Upload the IFC.RVT files to BIM 360.

Open the files in AutoCAD:

  1. Open the file(s) in AutoCAD.
  2. Bind all links to the file, combining IFCs, XREFs, etc.
  3. Make sure project coordinates are Origin to Origin.
  4. Upload file(s) to BIM 360.

For files that need to be linked

  1. Open each file in Revit.
  2. Save as RVT file.
  3. Link the RVT files in Revit.
  4. Upload to BIM 360 as linked files.


Rafal Gaweda
Nachricht 3 von 3
MiguelYanezSuarez
als Antwort auf: Rafal.Gaweda

Hola, gracias por la respuesta, al final le he corregido las coordenadas adquiriendolas de otro fichero

 

Sobre tu contestación, al abrir el IFC y guardarlo con otro formato pierde las coordenadas que trae

 

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report