Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

problem with zoom

7 ANTWORTEN 7
Antworten
Nachricht 1 von 8
tcbrcs
540 Aufrufe, 7 Antworten

problem with zoom

im having issues with zoom to fit. my drawing goes tiny at the bottom right,  when i turn on ref it is tiny and the ref box is huge. each tiem i change the view page the drawing disappear.  when i try to print the view ports are too huge, and i cant shrink it. So far ive tried to turn on/off crop, scale box etc and its not working

7 ANTWORTEN 7
Nachricht 2 von 8
barthbradley
als Antwort auf: tcbrcs

By chance, is the Internal Origin marker visible in the View?  

Nachricht 3 von 8
tcbrcs
als Antwort auf: barthbradley

yes I can see the arrow that goes in different directions, with the circle
with the x in it. My designs are a long distance to the south south west
of that marker.
Nachricht 4 von 8
barthbradley
als Antwort auf: tcbrcs

Turn it off.  Its checkbox is under Site Category. 

 

IOOff.png

Nachricht 5 von 8
tcbrcs
als Antwort auf: barthbradley

I turned it off, and it the zoom is still not zooming to fit. also when i
click elevations the elevation lines in in one place and my side view is a
good distance over.
Nachricht 6 von 8
barthbradley
als Antwort auf: tcbrcs

I'm not understanding. Post some pictures.  

 

Also, posting file may help.  

Nachricht 7 von 8
ToanDN
als Antwort auf: barthbradley

@tcbrcs 

 

Turn Off: Internal Origin, Project Base Point, Survey Point.

Nachricht 8 von 8
tcbrcs
als Antwort auf: tcbrcs

its only allowing me to post one pic. But as you can see my zoom isnt
allowing the drawing to come in bigger. I have to manuelly make it bigger
to design. Also you could see the design is in one spot, and the elevatoon
lines, some place else. normally when i opened a N
drawings is aligned on the proper elevation level.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report