Polyline Based Families / String Together Line Based Families

cmerloEXWAB
Explorer

Polyline Based Families / String Together Line Based Families

cmerloEXWAB
Explorer
Explorer

Is it possible to either generate a family that follows a polyline or to string together multiple Line based Families that autojoin? I'd Like to have a countertop family that is pretty much All Purpose but you end up with seams for inside turns and gaps for outside turns. I've attached photos and a copy of the family I made as a trial for this.

cmerloEXWAB_0-1724935597537.png

 

0 Likes
Reply
Accepted solutions (1)
355 Views
4 Replies
Replies (4)

Tom_Kunsman
Collaborator
Collaborator
Accepted solution

Not aware of any way of having separate families "autojoin" like you are suggesting. Walls can for sure.

 

You could consider some visibility parameters with this to control when a infill/corner needs to happen. Although I think such a family might have a lot of options that might make it difficult to use.

If you find my post interesting, feel free to give a Kudo.
If it solves your problem, please click Accept to enhance the Forum.
0 Likes

barthbradley
Consultant
Consultant
0 Likes

handjonathan
Community Manager
Community Manager

Hi @cmerloEXWAB 

Thanks a lot for posting your question to the forums!   Have the solutions suggested by @Tom_Kunsman @barthbradley helped with your issue?

We look forward to hearing back from you with more information so we can help you as a community! 



Jonathan Hand


Industry Community Manager | AEC (Architecture & Building)

0 Likes

ToanDN
Consultant
Consultant

Use railing, wall, or in place sweep.

0 Likes