Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Parametric families -how to dimension non-parallel reference planes

2 ANTWORTEN 2
Antworten
Nachricht 1 von 3
eschurr11
285 Aufrufe, 2 Antworten

Parametric families -how to dimension non-parallel reference planes

Hi,

Still a beginner at parametric families. Have followed tutorials where every plane/line is conveniently parallel or orthogonal.

How do I dimension an object like the following?:

IMG_1134.jpg

 I want to extrude this shape along an axis. The problem is that I cannot dimension the interior walls (they are not parallel.) 

Basically I want to be able to parametrically set width and height of this object and extrude to a certain length.

2 ANTWORTEN 2
Nachricht 2 von 3
EATREVITPOOPCAD
als Antwort auf: eschurr11

EATREVITPOOPCAD_0-1640810040355.png

  1. Select dimension tool
  2. Hover over the red dots in the image, hit tab until the "dot" is selected
The definition of insanity is doing the same thing over and over again and expecting different results
Nachricht 3 von 3
barthbradley
als Antwort auf: eschurr11

RefPlane1229.png

 

RP1229-1.png

RP1229-2.png

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report