Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Parameter driven height of urinal not working

5 ANTWORTEN 5
GELÖST
Antworten
Nachricht 1 von 6
skyeg321
361 Aufrufe, 5 Antworten

Parameter driven height of urinal not working

Hi All,

 

I am trying to drive the height of a wall based urinal family with a type parameter. It works fine in the family editor but in a project it slams the 'Standard' family to the floor. The accessible urinal works fine in both the family editor and in projects. Any ideas?Urinals Height Parameter.pngUrinals Default Height.png

5 ANTWORTEN 5
Nachricht 2 von 6
ToanDN
als Antwort auf: skyeg321

Set the ref plane at the Level to Origin in the family.  Or share the family here.

Nachricht 3 von 6
skyeg321
als Antwort auf: skyeg321

Hey Toan. Not sure what you mean. Here is the family.

Nachricht 4 von 6
ToanDN
als Antwort auf: skyeg321

The family does not have a ref plane at the Level.  Add it, lock it to Level line, and set it to Defines Origin.

 

ToanDN_0-1716409683785.png

 

Nachricht 5 von 6
eizinmyat
als Antwort auf: skyeg321

Hello, 

Could you try changing this Height parameter from Type parameter to Instance parameter?

Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

Ei Zin Myat
Technical Sales Unit Engineer
ONESTRUCTION Co., Ltd.
eizinmyat@onestruction.com
Nachricht 6 von 6
skyeg321
als Antwort auf: ToanDN

It worked! Thanks @ToanDNToanDN.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report