Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Not able to see the extent of a particular view

3 ANTWORTEN 3
GELÖST
Antworten
Nachricht 1 von 4
ahirani24
399 Aufrufe, 3 Antworten

Not able to see the extent of a particular view

So, when I click on the top arrow shown in the screenshot. I am supposed to get two lines (or bars), which would help me determine the extents of the view in elevation 3d. However, I am able to get such one line or bar. the other dotted bar doesn't appear.

Beschriftungen (1)
3 ANTWORTEN 3
Nachricht 2 von 4
GustavoUbriaco
als Antwort auf: ahirani24

Hi, this is because you have the far clipping with no clip, change to clip with or without line

GustavoUbriaco_0-1625609602261.png

GustavoUbriaco_1-1625609659445.png

 

 

Gustavo Ubriaco Contreras
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Nachricht 3 von 4
GustavoUbriaco
als Antwort auf: ahirani24

differences between with show the lines where the view cuts and without not, no clip is unlimited.

 

Without

GustavoUbriaco_0-1625609843912.png

With

GustavoUbriaco_1-1625609892451.png

Here is the location of the elevation for illustratives proposals 

GustavoUbriaco_2-1625610004915.png

 

 

 

Gustavo Ubriaco Contreras
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Nachricht 4 von 4
ennujozlagam
als Antwort auf: ahirani24

you can try this? thanks

eleview.JPG





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report