Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Modifiable pressed metal / hollow metal door frame

2 ANTWORTEN 2
Antworten
Nachricht 1 von 3
Anonymous
725 Aufrufe, 2 Antworten

Modifiable pressed metal / hollow metal door frame

Pressed metal, or hollow metal, door frames with side lights, exist in almost every commercial building I walk through. However, they don't seem to be available in Revit 2020. If we need a modifiable 3d frame, with side light - or multiple side lights, is this something that has to be purchased? Using Revit Storefront to fake it doesn't work because of the door schedule issue, and it crashes Revit. If there are suggestions out there, specific answers would be nice, as we have already done the basic research like checking BIMOBJECT, NATIONALBIMLIBRARY, STEELDOOR.ORG.

2 ANTWORTEN 2
Nachricht 2 von 3
bill_gilliss
als Antwort auf: Anonymous

Look at the All-in-One Door Family at https://www.revit-content.com/

 

This is a highly adaptable set of professionally-constructed Revit families. There's a learning curve.

 

I'm a very satisfied customer.

Nachricht 3 von 3
barthbradley
als Antwort auf: Anonymous

There are plenty "out there".  Just go directly to the Manufacturer's web site and see I they offer Revit Content. Also, BIMObject is a good source.   

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report