Modelling custom roofs in Revit 2020

Modelling custom roofs in Revit 2020

Anonymous
Not applicable
349 Views
1 Reply
Message 1 of 2

Modelling custom roofs in Revit 2020

Anonymous
Not applicable

Hi there,

 

I am a very new user of Revit 2020. I have recently finished studying two Revit courses on architectural modelling and roof modelling.

I would be grateful if someone could take the time to model and film the techniques they are using for the following projects I have included in this post. I have attached the 3 projects as Revit files for your reference. So far I have managed to model the walls and floor slabs but I am currently struggling with the roofs. They are a bit complicated as the geometry intersects in most cases. I would appreciate if someone could help me out model these and include the corresponding videos for me to understand how these custom roofs should be constructed.

Many thanks,

maria

0 Likes
Accepted solutions (1)
350 Views
1 Reply
Reply (1)
Message 2 of 2

barthbradley
Consultant
Consultant
Accepted solution

You might have an easier go of it if you use "Pick Walls" method.  

 

Pick Walls.png

0 Likes