Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Missing Survey Point in Revit 2020.2

4 ANTWORTEN 4
GELÖST
Antworten
Nachricht 1 von 5
Anonymous
1551 Aufrufe, 4 Antworten

Missing Survey Point in Revit 2020.2

Revit 2020.2

Units are Meter, Rounding 3 Decimals.

Floor Plans: Site.

I unclip the Surveying Point and move it to Northing 200000, Easting 600000, Z 300 (Swiss Coordinates).

I clip the Surveying Point again. The Surveying Point disappears in Site floor plan.

 

This did not happen before. I used Revit 2020.0 and it worked fine.

Important aspect in order to combine my Civil 3 and Revit projects.

4 ANTWORTEN 4
Nachricht 2 von 5
barthbradley
als Antwort auf: Anonymous

Are you saying that the SP is/was visible in the view when it is unclipped?  If so; that's weird.  If not; I suspect the new coordinates place the SP outside of the View Range.  

 

Other troubleshooting steps:

-Turn on Reveal Hidden Elements. 

-Turn off View Crop.  

-Zoom to Fit

Nachricht 3 von 5
Anonymous
als Antwort auf: barthbradley

Yes, it was visible.

When you clip it, it disappears.
I tried all your suggestions.
None works.

I did this workflow moving the SP, etc. before 100 times.
State plane coordinates, Civil 3D - Revit collaboration … .
Since Revit 2020.2 I have the problem.

Nachricht 4 von 5
barthbradley
als Antwort auf: Anonymous

What are View Range settings?  

Nachricht 5 von 5
Anonymous
als Antwort auf: barthbradley

Yes, I have to move up the elevation of the Cut Plane in View Range. Then everything works fine and the Surveying Point and the Project Point are visible.


Thanks!!!

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report