Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Missing some windows, doors, and masses in elevations and 3D views

5 ANTWORTEN 5
GELÖST
Antworten
Nachricht 1 von 6
mtennant
388 Aufrufe, 5 Antworten

Missing some windows, doors, and masses in elevations and 3D views

When i open the sheet all the elements are there, but when i zoom in or out elements disappear in view.  If you run your mouse over them they are still there.  If i delete them and then undo it, they reappear but then when i zoom in and out they disappear again.  Also when i print the sheet elements don't show up.

5 ANTWORTEN 5
Nachricht 2 von 6
ToanDN
als Antwort auf: mtennant

Does turn off Hardware Acceleration help?

Nachricht 3 von 6
ennujozlagam
als Antwort auf: mtennant

maybe this one help? thanks

https://knowledge.autodesk.com/support/revit/troubleshooting/caas/sfdcarticles/sfdcarticles/Views-ha...





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 4 von 6
mtennant
als Antwort auf: ToanDN

These are the current selections in my Graphics tab, i tried them multiple ways and it correct the file and then when i zoomed in it shifted back to not being able to seeing them.  I'm currently running Revit using Parallels on my Mac, could that have anything to do with it?

Nachricht 5 von 6
ToanDN
als Antwort auf: mtennant


@mtennant wrote:

These are the current selections in my Graphics tab, i tried them multiple ways and it correct the file and then when i zoomed in it shifted back to not being able to seeing them.  I'm currently running Revit using Parallels on my Mac, could that have anything to do with it?


Sorry.  Go to Hardware tab, not Graphics tab, to untick the box.

 

ToanDN_0-1675706409915.png

 

Nachricht 6 von 6
mtennant
als Antwort auf: ToanDN

That did the trick...thanks so much... 

 

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report