Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Missing families when exporting from Revit Lt to IFC

6 ANTWORTEN 6
Antworten
Nachricht 1 von 7
info
702 Aufrufe, 6 Antworten

Missing families when exporting from Revit Lt to IFC

When exporting IFC from Revit Lt 2019 some (parametric) families or in place families are missing. What am I doing wrong?

6 ANTWORTEN 6
Nachricht 2 von 7
barthbradley
als Antwort auf: info

Got to ask: Are they actually placed in the 3D View you are exporting?  

Nachricht 3 von 7
info
als Antwort auf: barthbradley

Yes, they are actually placed in the 3D View before export to IFC.

Nachricht 4 von 7
Viveka_CD
als Antwort auf: info
Nachricht 5 von 7
ToanDN
als Antwort auf: info

Which categories do the families belong to? Which IFC Standard did you use to export?
Nachricht 6 von 7
info
als Antwort auf: Viveka_CD

Settings:

IFC 2x3 Coordination View / Level of detail: Low.Knipsel.JPGFamily: Generic model face based. After export only holes make with voids in the family are shown. All solids are missing.

 

Nachricht 7 von 7
info
als Antwort auf: info

After export IFC results are different if Open IFC file is used. Elements are then displayed.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report