Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Messed up stringer

2 ANTWORTEN 2
Antworten
Nachricht 1 von 3
Anonymous
244 Aufrufe, 2 Antworten

Messed up stringer

The stringer on the curved stair made would just sweep up and won't actually follow the run/landing.

stringer.png

2 ANTWORTEN 2
Nachricht 2 von 3
joe_keogh
als Antwort auf: Anonymous

Can you Copy/Paste the stair into a new file, and upload it here so we can take a look?

Joe Keogh
Director | Design Technology + Innovation
www.viewlistic.com.au

Nachricht 3 von 3
Anonymous
als Antwort auf: joe_keogh

I somehow managed to fix it, but there's still stringer issues. like the sudden elevation of a stringer from the other.

 

For the previous problem, I found out that the stringer won't follow the profile of my stairs because I made it through sketch, so I created a new sketch using the "Center-Ends Spiral" (or should there be no problems even if I sketch it?)

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report