Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Membrane Line Type

2 ANTWORTEN 2
Antworten
Nachricht 1 von 3
dm0144
1600 Aufrufe, 2 Antworten

Membrane Line Type

Hello everyone

 

I have created a detailed based component representing a mebrane layer in a callout view.

The issue I have is that I can not draw precise line lengths or continous lines at intersections. The component is either shorter or longer than needed. Chech the red marks in the attached screenshots. 

 

Is there a way to correct the detail family or is there a line file similar as a dash line but with a black and white rectangles?

2 ANTWORTEN 2
Nachricht 2 von 3
RDAOU
als Antwort auf: dm0144

@dm0144 

 

Using repeating detail, that is as good as it can ever get. The extensions depend on the layout and rotation you apply to the detail (clockwise vs counter clockwise)...See GIF below

  • Start the first clockwise and the second counterclockwise then fillet at the middel

Repeating Detail.gif

 

Alternatively you could use a line based detail item with one of the following

  • A simple Detail Line with a Dashed line pattern with a suitable line weight (See example here)
  • A smart array of a nested filled region / detail item (overkill - see example here)

 

 

YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION


Nachricht 3 von 3
luisPDAN6
als Antwort auf: dm0144

 

This one works really well. I found it here:

 

https://goto.archi/revit-membrane.html

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report