Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Link revit model

2 ANTWORTEN 2
GELÖST
Antworten
Nachricht 1 von 3
steve
176 Aufrufe, 2 Antworten

Link revit model

I have 3 Revit models, 

 

  1. site plan
  2. structure #1
  3. structure #2

Currently [b] and [c] are revit-linked via bim-360 into [a] the site plan 

 

I want to create a site plan within the working drawing set of [b] so I want to linke [a] into [b] ... while separately [b] is linked into [a].   so...

  • [b] is linked into [a]

I want to make...

  • [a] linked into [b]

Is there a downside to this?  

 

2 ANTWORTEN 2
Nachricht 2 von 3
theslacollier
als Antwort auf: steve

Ensure your linked files are set to "Overlay" to prevent circular references. Additionally, consider creating a site plan within your site model and then establish a site view that is linked by view to all building models. This approach will maintain a single source of truth for site information and graphics, ensuring consistency across all building model documentation.

theslacollier_0-1731611348055.png

 

Consider using a different approach, such as using a single model as the primary reference and managing the other models as separate linked files without creating a circular reference.
If you proceed with the circular linking, establish clear protocols for updating and managing the models to minimize potential issues.
Regularly review and audit the models to ensure consistency and promptly address any issues.
It's essential to weigh the benefits against the potential downsides and ensure your team is prepared to manage the additional complexity.

RVT to the max
Nachricht 3 von 3
steve
als Antwort auf: steve

Thanks for the lucid response.   I have done as you say under "different approach".    I have a "parent" site model with "child" building models.  As you can imagine, I need to create a site plan within the "child model's" drawing sets.   And have sections and so forth linked within the "child" models, so no choice but to link back the parent model into it.      That ends up a bit of a mess, as notes from the "parent" don't come into the "child" but can work around that.  

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report