Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Lights not working

3 ANTWORTEN 3
Antworten
Nachricht 1 von 4
steadfasthomeplans
197 Aufrufe, 3 Antworten

Lights not working

I am trying to add lights. 

I can add plugs and carriage lights just fine, but pendant lights end up upside down and connected to the floor. It won't let me place can lights at all. 

I added in a ceiling. I don't know what I am missing. 

steadfasthomeplans_0-1707867245438.png

 

3 ANTWORTEN 3
Nachricht 2 von 4

Did you try to do this from a ceiling plan view?


Alfredo Medina _________________________________________________________________ ______
Licensed Architect (Florida) | Freelance Instructor | Profile on Linkedin
Nachricht 3 von 4

I did try that, but then I can't see the plugs...

steadfasthomeplans_0-1707868773215.png

 

Nachricht 4 von 4
ennujozlagam
als Antwort auf: steadfasthomeplans

you can add a plan region and set the value?





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report