Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Joining two walls with Edit Profile

6 ANTWORTEN 6
GELÖST
Antworten
Nachricht 1 von 7
Kev_D
1190 Aufrufe, 6 Antworten

Joining two walls with Edit Profile

Hey. I am trying to Edit Profile of the Curtain Wall so the Mullion is along the face of the other Wall. 

KevDeegan_1-1597435091087.png

 

 

KevDeegan_0-1597435009753.png

 

When I Edit Profile and align to face, I get the following error...'Line associated with a joined face has been moved. This action will cause the other walls to become disjoined from this face', and the profile jumps back to the center of the other wall.

 

NOTE. Both wall profiles have been edited.

 

Any ideas anyone? The error does not turn up many results online.

6 ANTWORTEN 6
Nachricht 2 von 7
barthbradley
als Antwort auf: Kev_D

Why don't use replace the Mullion with a duplicate that has a different justification?  

 

Duplicate Mullion.png

 

...or shorten the length of the wall?  :zwinkerndes_Gesicht:

Nachricht 3 von 7
ToanDN
als Antwort auf: Kev_D

Disallow join these walls, and all edited profile walls in general.
Nachricht 4 von 7
_Vijay
als Antwort auf: Kev_D

Instead of editing the wall profile try to play with mullion profile and offset of million and justification of Mullion.

Nachricht 5 von 7
Kev_D
als Antwort auf: _Vijay

Thanks all, but no recommendations work. 

Nachricht 6 von 7
Kev_D
als Antwort auf: Kev_D

ignore

Nachricht 7 von 7
Kev_D
als Antwort auf: Kev_D

So I was just selecting the Blue Dot at the end of the Wall in 3D and selecting 'Disallowing Join', but I should have to gone the Plan view and selected the join symbol and 'Disallowed Join' from here. 

KevDeegan_0-1597766530640.png

 

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report