Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Join Order and Phased Parts

3 ANTWORTEN 3
Antworten
Nachricht 1 von 4
Anonymous
388 Aufrufe, 3 Antworten

Join Order and Phased Parts

In this example we are trying to separate the cladding, through phasing and parts. The existing wall is broken into parts to demolish the exterior cladding. We then need to show the demolished section of cladding in an Previous + Demo phase view and the new construction cladding in a Previous + New phase view. When we join the wall together again in order to add doors/windows, the join order affects how the wall displays
 
Wall Example .pngParts Visibility.png

  

Beschriftungen (1)
3 ANTWORTEN 3
Nachricht 2 von 4
barthbradley
als Antwort auf: Anonymous

What are your Phase Filter settings for Previous + New?  Is Existing set to BY CAYEGORY?

Nachricht 3 von 4
Anonymous
als Antwort auf: barthbradley

Here is a screen shot of the Phase Filter Settings from the file I had attached. 

 

ctaiariol_1-1610121323500.png

 

Nachricht 4 von 4
barthbradley
als Antwort auf: Anonymous

I'm not totally sure what you are after, but try changing EXISTING to BYCATEGORY for "Show Previous + New" and see if that gets you what yo want. 

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report