Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Issue cutting toposolid

1 ANTWORT 1
Antworten
Nachricht 1 von 2
ct_studio
73 Aufrufe, 1 Antwort

Issue cutting toposolid

I have a toposolid that has been successfully cut with a void extrusion (red)

 

i am trying to cut it again with the highlighted void. This keeps failing.

 

There is a test cut in the middle by the green arrow just to demonstrate that the command works. It only seems to fail when I introduce my desired sketch geometry.

 

ct_studio_0-1733661890667.png

 

1 ANTWORT 1
Nachricht 2 von 2
ct_studio
als Antwort auf: ct_studio

I've been able to get most of it cut by doing the segments of the curve separately. It's taken about 40 minutes for each cut, including the initial cutting time and then finishing the in place model. 

ct_studio_0-1733670948337.png

this part always fails

ct_studio_1-1733671319425.png

 

 

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report