Announcements

Starting in December, we will archive content from the community that is 10 years and older. This FAQ provides more information.

Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

inconsistent stair cut line visibility

7 REPLIES 7
Reply
Message 1 of 8
jagostinho74
786 Views, 7 Replies

inconsistent stair cut line visibility

Hello all,

 

Finding that the stair cut line visibility is inconsistently produced for a mirrored version of the same stair.

 

It can be fixed via changing the View Range with a Plan Region but  it just seems a bit odd to behave this way so I thought about sharing it with the community.

 

Is this intended behaviour or can it be classified as a bug?

 

Stair cut line visibility.png

 

 

RVT attached.

 

Thank you

Assistant BIM/CAD Manager

Manchester, UK


Labels (1)
7 REPLIES 7
Message 2 of 8
mpukas
in reply to: jagostinho74

I have similar, but different, issues with stair cut lines not being consistent from one run of stairs to the next with the same view settings. I think the issue with your stair is that the cut line is being drawn from the same side of the stair at the same elevation/height, therefore same tread, and it's the direction of the cut line that is altered depending on which tread the cut line generated from. Instead of mirroring the stair, try drawing a new one in the opposite orientation and see how the cut lines behave. Otherwise, using a plan region is the only option I can see, and then stairs graphics can get weird with plan regions. 

Message 3 of 8
barthbradley
in reply to: jagostinho74

Enter a negative value for the Cut Line Angle. 

 

Cut Mark.jpgCut Mark 2.jpg

 

Cut Mark 4.jpg

Message 4 of 8
jagostinho74
in reply to: barthbradley

That will work @barthbradley , but I will loose the consistent orientation of the cut line and will require to duplicate the Stair Type. Both of these are not desirable.

Assistant BIM/CAD Manager

Manchester, UK


Message 5 of 8
jagostinho74
in reply to: mpukas

That's right, @mpukas . We are currently using Plan Regions to go around this problem. I was just wondering if there was something that I was missing.

Assistant BIM/CAD Manager

Manchester, UK


Message 6 of 8
barthbradley
in reply to: jagostinho74

I think I would duplicate the Stair Type.  This way I could identify the mirrored stairs in the Project. That information might come in handy -  especially if I need to troubleshoot other oddities cause by mirroring the stairs - which Autodesk warns us not to do.  

Message 7 of 8
jagostinho74
in reply to: barthbradley

That is an interesting point you make, indeed. There is some value on tracking which elements are being modelled with techniques that deviate from Autodesk's recommendations.

Assistant BIM/CAD Manager

Manchester, UK


Message 8 of 8
raimierygr
in reply to: barthbradley

I was having this problem and your recommendation worked for me. This is a townhouses project, where all linked models are the same but I made them making mirrors in the early stage of the project, Everything was fine, a good view range. Thank your for the solution.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report