Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

I cannot get my interior walls to touch the roof

6 ANTWORTEN 6
Antworten
Nachricht 1 von 7
frankie.love
295 Aufrufe, 6 Antworten

I cannot get my interior walls to touch the roof

I am working in a pre-made model of a condo complex and I am required to redesign they layouts of 2 complexes. I have laid down my interior walls and thought everything worked fine. Come to see that when I went into camera view, my interior walls do not touch the roof. I have tried editing type, didn't work. Tried attaching to top base, bottom base, etc. Anyone have any suggestions? 

6 ANTWORTEN 6
Nachricht 2 von 7
ToanDN
als Antwort auf: frankie.love

Select the walls and attach Top to the roof.  

Nachricht 3 von 7
frankie.love
als Antwort auf: ToanDN

I tried that 

Nachricht 4 von 7
frankie.love
als Antwort auf: frankie.love

There is a floor above me, not the roof.
Nachricht 5 von 7
ToanDN
als Antwort auf: frankie.love


@frankie.love wrote:
There is a floor above me, not the roof.

Same deal.  Walls can attach to floors.  Share the file you still can't.

Nachricht 6 von 7
barthbradley
als Antwort auf: frankie.love

You can also use a Ref. Plane as a target for Attach Top/Base.  Try that.  

Nachricht 7 von 7
526996629
als Antwort auf: frankie.love

If it's already attached to a floor below the roof then it doesn't allow you to attach it to the roof. Detach it from the floors and then attached it's top to the roof.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report